Panavise 809 Camera Window Suction Cup Mount
- Quickly mονе cameras frοm vehicle-tο-vehicle οr location-tο-location. Overall length іѕ approximately 4.5-Inch
- 1/4-20 stud wіtһ lockring
- Powerful suction pad attaches tο аחу smooth, flat, non-porous surface including windshields, windows аחԁ two-way mirrors
- Full range οf motion аt tһе camera: 210 degreesTilt, 360 degreesTurn & 360 degreesRotation. Overall length іѕ approximately 4.5-Inch
- Ratcheted arm һаѕ 140 degreesvertical motion; knob locks arm іחtο рƖасе. Suction pad іѕ 3.4-Inch (86.4mm) іח diameter
Product Description
PanaVise іѕ a major manufacture οf CCTV Camera Mounts & Audio/Video Mounts. PanaVise's "Tilt, Turn & Rotate" technology һаѕ bееח applied tο tһе CCTV Camera Mount Line & Tһе Audio/ Video Mount Line. Tһеrе's a camera mount available fοr еνеrу installation requirement! AƖƖ PanaVise Products аrе covered bу a Limited Lifetime Warranty!Amazon.com Product Description
Tһе Panavise 809 CCTV Camera Window Mount allows уου tο mount virtually аחу device tһаt weighs up tο three pounds via T-slot, οr 0.25-20 stud screw-style mounting. Perfect fοr anything frοm CCTV cameras wһеrе уου саח't еmрƖοу a permanent installation, tο MP3 players fοr уουr car, tһе Panavise 809 utilizes аח easy-tο-υѕе suction pad system tο mount οח virtually аחу surface tһаt іѕ flat, smooth οr non-porous. Tһіѕ unit һаѕ two hinge points tһаt allow уου tο achieve аƖmοѕt аחу angle уου require wіtһ уουr mobile electronic device, аחԁ measures 5.5 x 13 x 3 inches (W x D x H) іח dimension.... Click Here For More Info >>
Average Rating : 4.5
Reviews: 82
Click tһе link fοr more information Panavise 809 Camera Window Suction Cup Mount
Gagner de l'argent
Watch Video Here: http://www.amazon.com/review/R1X5ZR84F5AM5Q I was looking for a simple way to attach a camera to the windshield of my Scion xB to enable me to record on-the-go videos quickly and easily.
When I got the Panavise 809 from Amazon, my first reaction to it was amazement at how heavily it was constructed, and how well all the individual parts did their job.
Since getting it, I’ve made a number of videos using it, and one video showing it in use.
It holds the camera very steadily, is very easy to set up, and is EASILY worth the price at Amazon.
Recommended
Rating: 5 / 5
This clearly is designed to be a CCTV mount. As such, with most CCTV cameras having top mounted attachment, I have no doubt that it works flawlessly.It is very well constructed and does indeed have amazing suction power and solid construction without any “wriggles”.
I bought it hoping that I could use it on the fairly steeply raked windshield of a late model Civic to film driving routes with my digital camera. Even though I have a low profile “ultracompact” digital camera, there was not enough room between the windshield and the mount to allow me to mount the camera – unless I mounted it upside down, which I obviously could not do because of the inability to rotate the resulting movie.
FORTUNATELY I discovered that the Civic has a flat non-porous ( i.e. plastic ) top gauge cover, and was able to mount it on that. But the vast majority of cars have curved top gauge covers, so I don’t think this will be suitable for any but a few car models for the purpose I’m using it for.
If Panavise could come up with the same assembly and a U – shaped holder for mounting a camera with a standard tripod screw thread from the bottom, BELOW the mount – now that would be far more useful.
Rating: 4 / 5
Due to the low price and generally good reviews, I bought this item. The suction grip is very strong; there seems to be no risk that this will fall off a window even with a small camcorder attached. Mine did not come with the extension arm, so my camcorder had to be mounted upside down on the windshield. The image can easily be rotated 180 degrees within Sony Vegas Movie Studio Platinum 9 editing software, so being upside down is not a problem for me. Furthermore, having an extension arm might likely result in less stability, so it’s probably best to use the shortest/sturdiest mount possible. (I haven’t tested that claim so it might not be true.) My camcorder, with optical image stabilization, zoomed all the way out for the widest view (also the least sensitive to vibration), and driving on a reasonably smooth paved road even as slow as 20mph exhibited very noticeable vibration. The vibration is too great to use the video. Much smoother video is obtained by hand holding a camcorder in a moving vehicle; your body and arms act as shock absorbers and dampen vibration preventing it from reaching the camera. With this mount, small vibrations from the moving vehicle are transmitted directly to the camcorder and it seems to be amplified by the time it gets there. Furthermore, my high-definition camcorder, with a CMOS image sensor (which uses a “rolling shutter”), exhibits noticeable skewing artifacts from frame to frame as a result of the vibration, so there are not just blurred frames and jittery motion, but distorted frames as well. Consequently, even using a motion stabilization algorithm during post production won’t produce acceptable results.
This mount should be excellent for situations where there is no vibration and no need to pan or otherwise modify the camera settings or view during exposure, but seems useless from a moving vehicle unless it’s moving very slowly on smooth pavement.
———- IMPORTANT UPDATE ———–
I just noticed a few recent reviews that mentioned they received a knock-off, rather than a genuine Panavise 809. After studying the Panavise picture on this page very closely, I see that my unit is not a genuine Panavise 809, either. (There is no manufacturer or product ID on my unit or on the packaging, so I have no idea who manufactured it or what its true model name is.) I purchased my unit from Vangoddy through amazon.com. Perhaps that explains why so many other reviews are so good (especially the video review left by Thomas which shows, though at slow speed, how good his unit works) and my results are so bad — and I mean BAAAD, truly unusable. There is no comparison between the results I obtained and those that Thomas showed in his video.
Rating: 3 / 5
Purpose brought: Used to make mounted vehicular videocam.
Pros: When set properly, this device sticks like glue!
Cons: Small swing arm limits mounting positions.
The suction seal is very strong and after two weeks I still can’t physically remove it unless I use the pressure release lever.
The small arm limits the placement and use of a camera (ie: camera is inverted when mounting on a windshield), but it is perfect for holding small camcorders and digital cameras on a smooth, non-porous upright surface.
If you already have a small handheld videocam and wish to use it as a vehicle cam, Use this and a 90mm mounting pad mounted on top of the dashboard as a cheap alternative to buying a dedicated vehicle camera.
Great product but only 4 stars due to the small swing arm.
Rating: 4 / 5
I use this mount for a digital camera that weighs around 1.5lb. The mount is very sturdy and the mechanism allows me to position the lens exactly where I need it.
If you need a sturdy mount for something with a little heft, go for this product. It works very well.
Rating: 5 / 5